Hex Drivers
 |
 Titan Tool Bag w Tool Set 10002 RC WillPower Utility Screw Driver Hex Wrench  US $240.51
|
 ED110992 EDS TOOLS HEX DRIVER SET 15 20 25 3 US $70.97
|
 ED110881 EDS TOOLS HEX DRIVER SET 035 050 X US $55.17
|
 Racers Edge RCE7700 Power Grip Hex Driver Set FREE SHIPPING US $45.50
|
 ED110882 EDS TOOLS HEX DRIVER SET 050 X 60MM US $42.52
|
 Dynamite Metric Hex Driver Set 15mm 20mm 25mm US $35.49
|
 HEX DRIVERS SET 4 IN 1 1MM 15MM 2MM 3 MM DRIVERS US $33.18
|
 Fastrax Imperial Hex Driver Set US $33.13
|
 Fastrax Hardened Hex Driver Set Metric US $23.44
|
 DYNAMITE IMPERIAL HEX DRIVER SET 5 PIECE suits Losi DYN2825 US $20.47
|
 NEW BON 10687 HEAVY DUTY HEX DRIVER 7PC SET127 5MM US $19.99
|
 Hudy Ultimate Hex Driver 25mm US $19.51
|
 precision metric hex wrench kit tool allen nitro rc 5pc set new tools drivers US $15.00
|
 EDS Racing Ball Hex Driver 078 5 64 x 120mm US $14.56
|
 Hudy Hex Driver 063 1 16th US $13.25
|
 Axial AX20018 20018 25mm Ball End Hex Driver Allen US $13.00
|
 EDS Racing Ball Hex Driver 30 x 120mm US $12.93
|
 EDS Racing Hex Driver 093 3 32 x 120mm US $11.30
|
 EDS Racing Hex Driver 063 1 16 x 120mm US $11.30
|
 ED110114 EDS TOOLS HEX DRIVER 15 X 45MM US $11.05
|
 ED110128 EDS TOOLS HEX DRIVER 25 X 45MM US $11.05
|
 ED110124 EDS TOOLS HEX DRIVER 20 X 45MM US $11.05
|
 ED110115 EDS TOOLS HEX DRIVER 15 X 120MM US $11.05
|
 ED110130 EDS TOOLS HEX DRIVER 30 X 120MM US $11.05
|
 ED110293 EDS TOOLS HEX DRIVER 093 3 32 X 120 US $11.05
|
 ED110278 EDS TOOLS HEX DRIVER 078 5 64 X 120 US $11.05
|
 7 Tool kit Hex key Screw Driver for king 2 lama belt cp US $10.99
|
 Associated ASC1657 050 Standard Hex Driver US $8.99
|
 Associated ASC1658 1 16 STD HEX DRIVER US $8.99
|
 Associated ASC1659 5 64 20MM STD HEX DRIVER US $8.99
|
 Associated ASC1660 3 32 STD HEX DRIVER US $8.99
|
 Associated ASC1661 15MM STD HEX DRIVER US $8.99
|
 Associated ASC1662 25MM STD HEX DRIVER US $8.99
|
 EDS Power Tool Tip Hex Driver 20mm x 100mm US $8.68
|
 EDS Power Tool Tip Hex Driver 15mm x 100mm US $8.68
|
 ED511120 EDS TOOLS HEX DRIVER 20 X 100MM POWER US $7.89
|
 RPM Hex Driver 2mm 5 64 80640 US $7.10
|
 EDS Racing Ball Hex Driver 20 x 120mm Replacement Tip US $6.78
|
 ED121293 EDS TOOLS BALL HEX DRIVER 093 3 32 US $6.29
|
 ED121130 EDS TOOLS BALL HEX DRIVER 30 X 120MM US $6.29
|
 ED121120 EDS TOOLS BALL HEX DRIVER 20 X 120MM US $6.29
|
 ED111115 EDS TOOLS HEX DRIVER 15 X 120MM TIP O US $4.71
|
 ED111125 EDS TOOLS HEX DRIVER 25 X 120MM TIP O US $4.71
|
 ED111120 EDS TOOLS HEX DRIVER 20 X 120MM TIP O US $4.71
|
 Dynamite DYN2817 Hex Driver 3mm US $3.99
|
Screwdriver Types And Ideas
The most common kinds of screwdrivers are those that have a blade end. These are called flat blade screwdrivers. They have been around the longest. They are what is called traditional, whatever that is. The second most common drivers are the Phillips head screwdrivers. These drivers have a four-star point at the end that fits into the cross-shaped top of a Phillips screw. These screwdrivers are supposed to allow you to apply more torque to the screw. Because of the cross-shaped depressive disorders within the top of the screw, the screwdriver will not slide from the mess mind as easily as the flat blade may out of a position head mess.
Speaking of torque, it is always important to get the right screwdriver for the screw that you are driving. That is important in more than one area. Some folks try to use a flat blade screwdriver in a Phillips head screw or vice-versa. This is not a good idea. Also some will try to use the wrong size screwdriver for the screw. Either the slot head is too small for the blade end of the screwdriver or the blade could be too wide to fit down snugly into the slot of the screw. When you fit the blade or point of the screwdriver into the slot or star of the screw you can tell if there is a snug fit. With the slot screwdriver the blade should not only fit snugly into the slot, but it should not hang out over the edges of the screw either. With the Phillips screwdriver the tip of the tool should fit snugly down into the cross shape with no play from side-to-side. If the tip of the driver does not fit correctly into the screw you could damage either the head of the screw or the surface into which the screw is being driven. Neither of these results is pleasant, it is much more difficult to try to extract a damaged screw, than it is to use the right screwdriver in the first place.
There are some other screwdriver types that are less commonly known. One of these is the torx screwdriver. This one is designed for high torque applications. The end of the tool has a star shape. It is not exactly like the Phillips, but similar. The star shape allows for very high torque to be applied to the screw. Other types of these high torque screwdrivers include variations that are similar to the torx. These are polydrive, spline-drive, double hex, triple square, and Bristol.
Obviously the different types of screwdrivers apply torque to screws that are put into different types of surfaces. The blade type driver would be used primarily for wood and softer metal surfaces. It is a very good idea to drill a pilot hole where the screw will be placed in the surface. Obviously you want that hole to be just a little smaller in diameter that the screw. Another way to make the hole into which the screw will be driven is to use a nail and hammer. Always use a nail that is smaller than the diameter of the screw to make the hole. And do not drive the nail in too deep. You simply want a pit that will permit the first becomes from the screw to begin to hold when it's put in the hole with a screwdriver. Also the nail needs to be pulled out easily. That hole will make sure that the screw will hold fast when it is screwed into the surface. Also the hole will make it much easier to screw in the screw, you won't have to use as much force with the screwdriver.
The Phillips screwdriver would allow you to effectively put screws into harder woods and metals, while the torx driver would allow you to put screws into very hard metals. There are a lot of variation of each of these types also. There are short, thin shaft blade screwdrivers that are called Cabinet. These are usually used for working with low torque applications such as putting screws into the soft wood of a cabinet, hence the name. There are variations in the length of the shafts of a screwdrivers. Some are short or stubby for working in tight places. Some have very long shafts for reaching down into hard to reach areas. Contrary to what you are able think, the actual lengthier base of the screwdriver does not allow you to utilize more twisting towards the mess. Having a larger handle for the screwdriver will allow greater torque to be applied. For the extremely high torque applications the ratchet screwdriver can be used very effectively. This tool combines a blade or other type of tip with the high leverage handle. This combination will produce very high torque for putting screws into very hard surfaces.
How do I clean out the metal shards in a magnetic hex driver?
I use a 1/4" hex driver to do sheetmetal work. The hex head works nice until it fills up with tiny metal pieces. How can I clean them out and make it like new?
I do metal work too.
I clean mine with putty sealant like duct gasket material or anything like that - Permagum, DuctSeal, etc. You could probably use PlayDoh too. Just stick a piece in the head and pull the chips out.
I've also heard of putting silicone in the head, letting it dry, and pull the dry silicone off, peeling the chips right out.
HobbyKing - Turnigy Long Shaft 4pc Hex driver set
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.