Fits Savage
 |
 34Pcs KNUCKLEC HUBA ARMCVD Fits SAVAGE 21 25 SS  US $285.99
|
 30Pcs KNUCKLEC HUBA ARMBULKHEAD Fits SAVAGE 21 25 SS US $235.99
|
 24Pcs KNUCKLEC HUBA ARMBEARINIG Fits SAVAGE 21 25 SS US $179.99
|
 4Pcs U JOINT HALF CVD DRIVE Fits SAVAGE 21 25 46 SS X US $92.00
|
 F R KNUCKLE STEERINGC HUBBEARING Fits SAVAGE 21 25 X US $89.99
|
 8Pcs FULL SHOCK SUSPENSION DAMPER Fits HPI SAVAGE X US $85.99
|
 ALLOY F R DIFFERENTIAL GEAR BOX Fits HPI SAVAGE X US $54.50
|
 ALLOY F R DIFFERENTIAL GEAR BOX Fits HPI SAVAGE X US $54.50
|
 Alu Tuned Dual Exhaust Pipe Fits HPI Savage 21 25 46 X US $49.99
|
 Spinner Fits Traxxas Revo E T maxx 25 33 Savage Wheel US $48.99
|
 40 Series Rim Fit T maxx Monster GT Savage 21 25 Revo G US $47.99
|
 40 Series Wheel Fits T maxx Monster GT Savage 25 Revo US $47.99
|
 Alu Tuned Dual Exhaust Pipe Fits HPI Savage 21 25 SS X US $46.99
|
 4Pcs ALLOY F R C Hub Fits HPI SAVAGE 21 25 46 SS X US $46.99
|
 4 x LOWER SUSPENSION ARM Fits HPI SAVAGE 21 25 46 SS US $44.99
|
 HPI Savage 47T Spare Steel Spur Gear Fits 86805 6 7 US $43.93
|
 HPI Racing Land Rover Defender Body to fit Savage 7199 US $44.24
|
 4 Spinner Fit Savage E T Maxx 25 21 Revo Monster GT B US $39.99
|
 4 Spinner Fit Savage E T Maxx 25 21 Revo Monster GT G US $39.99
|
 TITANIUM SHAFT UPPER ARM Fits HPI SAVAGE 21 25 46 SS X US $39.99
|
 TITANIUM MAIN DRIVE CVD AXLES Fits HPI SAVAGE 21 25 SS US $36.99
|
 2Set ANTI ROLL BAR STABILIZER Fits HPI SAVAGE 21 25 SS US $35.99
|
 2 Pcs SHOCK ABSORBER DAMPER TOWER Fits HPI SAVAGE X US $31.99
|
 hot bodies c8214 lightning gt shell clear fits hpi savage US $31.60
|
 ALLOY CENTER SKID PLATE FITS SAVAGE XL US $29.99
|
 2P SHOCK ABSORBER DAMPER TOWER Fits HPI SAVAGE 21 25 SS US $29.99
|
 BLUE ALU FRONT BUMPERLED Fits HPI SAVAGE 21 25 SS 46 US $28.99
|
 Silver Alu Front BumperLED Fits HPI SAVAGE 21 25 SS US $28.99
|
 SILVER REAR BUMPERLED LIGHT Fits HPI SAVAGE 21 25 SS US $28.99
|
 BLUE REAR BUMPERRED LED LIGHT Fits HPI SAVAGE 21 25 SS US $28.99
|
 2Pcs ALU FR Body Post Mount Fits SAVAGE 21 25 46 SS X US $25.99
|
 F R STEERING Block Knuckle Fits HPI SAVAGE 21 25 SS X US $24.99
|
 FULL ALU SHOCK SUSPENSION DAMPER Fit SAVAGE 21 25 46 X US $24.99
|
 TIE ROD TITANIUM TURNBUCKLE Fits SAVAGE 21 25 46 SS X US $21.99
|
 ALU ENGINE AIR2 FUEL FILTER Fits SAVAGE 21 25 46 SS X US $21.99
|
 STEEL CENTER AXLES CVD Drive Fits HPI SAVAGE 21 25 SS US $21.50
|
 Fuel Filter Tube Fit T maxx Revo Ntc3 Savage XXX NT 777 US $18.99
|
 ALUMINUM ALLOY MAIN CHASSIS MOUNT Fits HPI SAVAGE X US $18.99
|
 ALU STEERING SERVO SAVER PLATE Fits HPI SAVAGE X US $17.99
|
 TIE ROD STEEL TURNBUCKLE Fits SAVAGE 21 25 46 SS X US $17.99
|
 Wheel Lock Hub nut Fit HPI Savage E T Maxx 15 21 25 33 US $17.99
|
 Alloy 3mm Main Chassis Fits SAVAGE 21 25 SS X US $17.99
|
 TITANIUM BRAKE DISC Fits HPI SAVAGE 21 25 46 SS X US $17.99
|
 ALU FUEL TANK PROTECTCAP Fits SAVAGE 21 25 46 SS X US $17.99
|
 Steel Front and Rear Wheel Shaft Fits HPI SAVAGE 21 25 46 SS X US $16.99
|
 6 pcs ALUMINUM F R ARM LOCK PLATE Fits HPI SAVAGE X US $16.50
|
 HPi 66195 tt 6 spoke wheels chrome fit savage 83x56mm pair US $15.79
|
 ALUMINUM DELRIN HANDLE Fits HPI SAVAGE 21 25 SS X US $14.99
|
 ALUM DIFFERENTIAL CASE CUP Fits SAVAGE 21 25 46 SS X US $14.99
|
 Front Rear Body Post Wing Mount Fit SAVAGE 21 25 SS X US $13.99
|
 Steel Main Gear 51 teeth Fits HPI SAVAGE 21 25 46 SS X US $12.99
|
 ALLOY F R BOX BULKHEAD BRACE Fits HPI SAVAGE 21 25 SS US $12.99
|
 ALLOY DRIVE HEX ADAPTOR 8MM Fits HPI SAVAGE X US $11.99
|
 ALLOY MAIN CHASSIS MOUNT Fits HPI SAVAGE 21 25 SS 46 US $11.99
|
 Aluminum Alloy Adaptor 17mm Fits SAVAGE 21 25 46 SS X US $9.99
|
 Axial Baja Buzzard Truck Body 060 Pre Cut fits Savage T Maxx E Maxx US $9.99
|
 Alloy Differential Lock Fits SAVAGE 21 25 SS X US $9.99
|
 Cappu BALL BEARING 6x13x5mm 10pcs FITS HPI SAVAGE 25 US $6.90
|
 Cappu BALL BEARING 6x13x5mm 10pcs FITS HPI SAVAGE FLUX US $6.90
|
 Cappu BALL BEARING 6x13x5mm 10pcs FITS HPI SAVAGE X SS US $6.90
|
Western Painting - Funk Art - An American Dimension
A local resident from Route 1, Bridgewater has put the beauty of the Shenandoah Valley scenery on canvas time after time. This artist has been painting for 36 years and her goal is not just to paint nature and carry around oils and easel in mountain ridges and rolling cornfields. More than that, she uses pictures clipped from daily newspapers to paint her masterpieces. For more information on paintings check out photo into painting.
According to her, she can put back the color in an old fashioned way, which is black and white. Then she adds that cutting out photos of animals and objects give her the chance to paint better and larger scenic paintings. She holds up a worn newspaper photograph of two millstones and points to how she had used them in the 15 by 4 foot mural that stretches across one wall of their family room. The rustic millhouse near the riverbank in the photo blends perfectly well with the grey mill wheels.
According to her, the large mural on her wall is a product of her methods, which include using the said photographs to add detail to other works like weather board buildings and wood land animals. To make it, she only needs water. Water is not hard to paint, it goes fast.
She showed a new photo cut out about a snow scene and mentioned that she will begin painting it soon. Snow is another thing that goes fast and is easy to do. Actually, she only has the mural and about two smaller scenes displayed around her home. She said that a large majority of her paintings have either been given away or sold. If you like this article on paintings visit canvas oil painting hand painted for more education.
She said she sells most of them through a furniture store in Hagerstown, Maryland. Her friends and neighbors usually ask her to paint, and she never turns them down. The artist is so busy with too many orders coming from all directions. People like to wrap her paintings and send them out as Christmas presents so she gets more orders during this season.
Native to Green mount section of the Rockingham County, this artist first started with painting lessons when she was 13, which she received from a nice old lady neighbor. Back then a lesson for an entire afternoon with the good lady only cost 25 cents. Her mother made her a small pallet using a lightweight weight board a long time ago, and she has kept it since. The old pallet was stained with oil paints, and a note about how it was made has been decoupage on it.
The family also built a family room onto their home with materials from their church that was torn down about six years ago. You get a clear view of the river thanks to the huge glass wall on one entire face of the room, and as the sun filters through you could just see how amazing it is. To bring the outside in, the nature and the woods, they used the glass.
She was looking for something that would fit, while she was painting the large mural. Her children told her the rustic family room and the bright foliage with rusts, red and gold did not mix well, so she had to redo the mural three quarters through completion. To give full emphasis on the mural, which tells people about all her love for painting, she decided to never put anymore paintings around the house no matter what, and besides, anything else will just be ignored.
rings and base to fit savage edge?
apparently the screws are too long or something, what rings and bases will fit my .243 savage edge?
The edge uses the same round bottom bases the savage 10/110 and stevens take.
Clone Wars Savage Oppress Tribute
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.